| | |  | Miscelaneous | Home » » Ironman Gravity 2000 Inversion Table | | | | | | | Description: | | The Ironman Gravity 2000 Inversion Table is built with a durable tubular steel frame with a scratch resistant powder coated finish. The table can support up to 300lbs and the user height is 6'6". It has tough rubber non-skid floor stabilizers that provide stability when inverting. Extra long safety handles provide easy return to an upright position and vinyl safety covers are added to protect hands and fingers. The backrest consists of 2"of soft vinyl covered foam, for extreme comfort when lying on the table. The ergonomically molded ankle holders provide comfort and security. When not in use the Gravity 2000 can be folded for storage. | | | Features: | |
• Sturdy inversion table for reducing back stress and stimulating circulation
• Durable tubular steel frame, tough nylon backrest, and powder-coated finish
• Tough rubber non-skid floor stabilizers; inverts up to 90 degrees
• Ergonomically molded ankle cushions; supports up to 300 pounds
• Folds for storage; measures 26 x 65 x 49 inches (W x H x D); weighs 55 pounds
| | | Product Details: | | | Product Length:
| 49.0 inches | | Product Width:
| 26.0 inches | | Product Height:
| 65.0 inches | | Product Weight:
| 55.0 pounds | | Package Length:
| 51.0 inches | | Package Width:
| 29.5 inches | | Package Height:
| 7.0 inches | | Package Weight:
| 58.0 pounds | | Average Customer Rating:
|  based on 84 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 84 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
71 of 71 found the following review helpful:
 a life saverMay 04, 2009
By Donnie P. Henderson
This is a great product, and a great price. It took roughly 50 minutes to assemble and I consider myself pretty handy. I went slow to make sure everything was correct. Also I was recovering from a pretty major back/hip injury. I first used it at about a 45 degree angle for about 30 seconds. But that short period was amazing. My right foot had numbness for about 6 months. That 1st short period cause a pins and needle feeling in my leg, and a warm feeling went from my hip to my foot. That helped my leg more that the hundreds of dollars that I had spent on massage therapist and doctors in the last couple of months. That being said this isn't a miricle cure all for all back problems. I have been using it for 2 weeks now and I feel about 85% now.
Now I am including the inversion table in my everyday therapy routine. In the morning I use the table for about 2-3 minutes at an agle of about 60 degrees. In the afternoon I use it at full inversion for about 5 minutes. I also walk for about 20 minutes once or twice a day, more on weekends. Also I stretch at night as much as I can tolerate.
Bottom line if you have back/leg pain due to compressed or bulging disk, this will probably help. For me it has help significantly.
32 of 32 found the following review helpful:
ironman 2000 inversion tqbleMar 29, 2009
By Slough Bayou
This is an elegant,durable, aesthetically pleasing machine. Simple and sturdy. The only difficulty that was encountered on assembly was slightly misalligned screwholes for attaching the feet(step # 1).Try putting the screws in without the feet to see if they're in parallel. If not, you will imediately see what you're up against and save yourself a lot of frustration. This "defect" does not warrant downgrading the machine.It is everything I had wanted for inversion, and stores almost instantly in three managabale pieces. The hardest part is admitting when it's time to get off!
43 of 45 found the following review helpful:
Excellent product, economical priceApr 27, 2009
By Julie M. Perez
"Momof2"
There were so many inversion tables to choose from, it took me several weeks to decide which one to purchase. Finally, I selected the Ironman Gravity 2000. I was worried that the low price would be an indicator of lesser quality, but that was not the case. It took approximately 45 minutes for my husband and me to assemble. The ankle supports and padded back are extremely comfortable and after using the table twice a day for 2 weeks my back is feeling quite better. I'm glad I made the right choice.
24 of 24 found the following review helpful:
gravity 2000 inversion tableApr 09, 2009
By Minnesota gopher
Researched many inversion tables and felt this table was the one for me.
Arrived in timely fashion. We put it together in about an hour, would have liked alittle more direction. Very sturdy and easy to use. Ankle clamps are excellent with no discomfort when holding you in place. Table itself has nice thick foam padding and comfortable to use. Good handles for pulling yourself back into upright position. Very very well built, for people weighing over 200lbs. Good product for the price.
22 of 22 found the following review helpful:
Ankle clamps are superior to other benchesDec 03, 2009
By Junky
"joe_joe_"
A friend of mine has a different inversion table with a different mechanism for holding your feet. I remember feeling insecure like my heels were going to slip out and I'd fall on my head. My feet became fatigued after just a few minutes. So I noticed that this bench had a different mechanism that instead clamps your ankles down. Immediately after trying this bench I could feel the difference. The ankle clamps on this machine feel nice and secure. The machine itself is built like a rock. I don't know what the $400 machines have but I don't care; This machine works fine. My only complaint is the assembly instructions. I am REALLY good at putting things together but this took me at least 2 hours. I could not tell heads or tails how to differentiate which nut, screw or washer was which, and where they go. This instruction diagrams were also very tiny.
See all 84 customer reviews on Amazon.com
| | |
|
